Fusion Splicer PDR618H

Features
• Handheld, Small, Light
• 8s splicing time,26s tube heating time
• 5800mAh and pluggable Li-battery, Typical 200cycles
• USB port for software updating and data records exporting
• ARC calibrated by temperature and air pressure automatically

General Specifications
Applicable Fibers : SM(ITU-T G.652&G657), MM(ITU-T,G652&G657) DS(ITU-T G.652&G657), NZDS(ITU-T G.652&G657)
Fiber Count : Single
Cladding Length : Cladding diameter: 80-150μm, Coating diameter:160-900μm
Typical Splice Loss : SM:0.02dB /MM:0.01dB /DS:0.04dB/NZDS:0.04dB /G.657:0.02dB (ITU-T Standard)
Return Loss : >60db
Fiber Cleaved Length : 10-16mm (coating diameter< 250μm),16mm(coating diameter:250-100μm)
Splicing Program : 40 groups
Operate Mode : Manual, Automatic
Auto-heating : Available
Typical Splicing Time : 8 seconds
Tube Heating Time : 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber View Magnification : 250X(X or Y view), 125X (X and Y view)
Viewing Method and Display : 2 CMOS cameras，4.3 inch color LCD monitor
Storage of Splice Result : 4000 results
Loss Evaluation : Available
Tension Test : 1.8~2.2N
Interface : GUL menu interface,easier operation
Battery Capacity : 5200mAh Battery Capacity,typical times(splice and tube heat)
Power Supply : Adaptor, input: AC 100-240V (50/60HZ)
Electrode Life : More than 4000 ARC discharges, can be replaced conveniently
Terminals : USB 2.0 port, for uploading splice results and upgrading software
Operating Condition : Altitude:0-5000m, Humidity:0-95%,Temperature:-10°℃~+50°℃; Wind speed: max 15m/s
Dimension : 149mm(L)x120mm (W)x127mm(H)
Weight : 1.9kg including battery